What is Zone Zero?
Zone Zero (Zone 0) is the first 0–5 feet around a structure, an area where embers may accumulate and ignite nearby combustible materials. Reducing those fuels can help lower the risk of fire spreading to the building. Zone Zero is distinct from wider defensible-space treatment in Zones 1 and 2.
The California Board of Forestry continues rulemaking and Office of Administrative Law review as of November 13, 2026. Do not treat every proposed rule as already enforceable statewide. Local ordinances, fire-authority directions and hazard-zone designation may impose separate requirements.
Los Angeles: property-level risk assessment
LA-area landscape requirements are influenced by the site’s fire hazard designation, local fire codes and vegetation conditions. Hillside communities and properties near wildland interfaces often warrant a different scope than dense urban sites.
Review outdoor storage, plant debris, combustible mulch, fences and vegetation against existing building materials, drainage and access requirements. Coordinate a proposed scope with the local fire authority where needed.
A practical five-foot perimeter assessment
- Walk every building perimeter, attached deck, stair landing, exterior wall, garage interface and adjacent utility area.
- Record combustible mulch, leaf litter, dead vegetation, woody shrubs, stacked materials and plant growth contacting siding.
- Review fences, gates and attached structures that could carry flame or radiant heat toward buildings.
- Evaluate possible noncombustible surfacing such as gravel, pavers or decomposed granite where appropriate.
- Preserve drainage, accessible paths, utility clearances, soil stability, existing trees and site-specific landscape needs.
- Review design with the local fire authority and relevant code professionals before implementing regulated changes.
Site recommendations depend on jurisdiction and on current adopted rules. Nature Care offers landscape assessment and improvement scopes; approval or certification by a fire authority is not implied.
Zone Zero inspection checklist for HOA managers
What is legally required in November 2026?
The Board of Forestry reports that the statewide Zone 0 package remains under final review with the Office of Administrative Law. State law directs creation of a five-foot ember-resistant zone in designated areas, but the final operative requirements and timing should be checked against publication and your local jurisdiction.
Some communities have existing local defensible-space, vegetation, brush-clearance or home-hardening rules. Check the local fire department separately. A hazard map indicates an area classification and does not by itself establish every maintenance duty.
Latest Board of Forestry Zone Zero status · CAL FIRE hazard maps
Frequently asked questions
Does Zone Zero replace all other defensible space requirements?
No. Zones 1 and 2 and existing local brush-clearance requirements may also apply.
Can a landscaping contractor certify legal compliance?
Compliance determinations are made under applicable law and by the relevant authorities; a landscaping scope is not a substitute for them.
Ask Nature Care to review your property
For HOA common areas, apartment communities, office parks and managed commercial sites in Orange County and Greater Los Angeles.
Official programs and authoritative sources
- California Board of Forestry: Zone Zero regulation status
- CAL FIRE fire hazard severity zone maps
- CAL FIRE defensible space information
Reviewed November 13, 2026. Rebate availability, program terms, regulations and local requirements can change; verify current requirements before approval or construction.