What is Zone Zero?
Zone Zero (Zone 0) is the first 0–5 feet around a structure, an area where embers may accumulate and ignite nearby combustible materials. Reducing those fuels can help lower the risk of fire spreading to the building. Zone Zero is distinct from wider defensible-space treatment in Zones 1 and 2.
The California Board of Forestry continues rulemaking and Office of Administrative Law review as of November 13, 2026. Do not treat every proposed rule as already enforceable statewide. Local ordinances, fire-authority directions and hazard-zone designation may impose separate requirements.
What HOA boards should review
- Which buildings and common areas fall under the applicable fire hazard zone maps.
- Whether community bylaws and municipal codes require board or architectural approval.
- Perimeter plantings, organic mulch, combustible fences and accumulated debris.
- Whether work affects drainage, utilities, walkways, resident access and tree health.
- How to phase scopes, inspections and ongoing maintenance across buildings.
Zone Zero inspection checklist for HOA managers
What is legally required in November 2026?
The Board of Forestry reports that the statewide Zone 0 package remains under final review with the Office of Administrative Law. State law directs creation of a five-foot ember-resistant zone in designated areas, but the final operative requirements and timing should be checked against publication and your local jurisdiction.
Some communities have existing local defensible-space, vegetation, brush-clearance or home-hardening rules. Check the local fire department separately. A hazard map indicates an area classification and does not by itself establish every maintenance duty.
Latest Board of Forestry Zone Zero status · CAL FIRE hazard maps
A practical five-foot perimeter assessment
- Walk every building perimeter, attached deck, stair landing, exterior wall, garage interface and adjacent utility area.
- Record combustible mulch, leaf litter, dead vegetation, woody shrubs, stacked materials and plant growth contacting siding.
- Review fences, gates and attached structures that could carry flame or radiant heat toward buildings.
- Evaluate possible noncombustible surfacing such as gravel, pavers or decomposed granite where appropriate.
- Preserve drainage, accessible paths, utility clearances, soil stability, existing trees and site-specific landscape needs.
- Review design with the local fire authority and relevant code professionals before implementing regulated changes.
Site recommendations depend on jurisdiction and on current adopted rules. Nature Care offers landscape assessment and improvement scopes; approval or certification by a fire authority is not implied.
Frequently asked questions
Should our HOA remove every shrub next to every building immediately?
Avoid blanket recommendations. Check current local fire rules, the applicable state regulations and site-specific conditions before work.
Is Nature Care the fire inspector?
No. Landscape assessments and scopes do not replace local fire authority inspections or code determinations.
Ask Nature Care to review your property
For HOA common areas, apartment communities, office parks and managed commercial sites in Orange County and Greater Los Angeles.
Official programs and authoritative sources
- California Board of Forestry: Zone Zero regulation status
- CAL FIRE fire hazard severity zone maps
- CAL FIRE defensible space information
Reviewed November 13, 2026. Rebate availability, program terms, regulations and local requirements can change; verify current requirements before approval or construction.